Shift Lock Release [EASY] - Hyundai Elantra - 2011/2012/2013/2014/2015/2016 - How to / DIY

ONLY Video you have to watch to get your 2011-2016 Hyundai Elantra&shifter out of park in LESS THAN 2 MINUTES You will need a flathead screwdriver to get your shifter out of park (Your vehicle should come with one. It should be in trunk, under the trunk carpet, where the spare tire is). Flathead screwdriver is a very common tool and if you don&have one, a fellow motorist, your friend would very likely have one. If you cannot absolutely find a screwdriver than you can try using a pin or any other pointed object as well. Your car&battery is dead! You have a helpful bystander who can help you jump start your car, but the vehicle is parked in a way where the cables are not long enough to reach your battery! Your car runs out of fuel but can&push your car to the nearest gas station (fueling station/petrol pump/gasoline station) Learn How to Shift Lock Release on a 2011 Hyundai Elantra / 2012 Hyundai Elantra / 2013 Hyundai Elantra / 2014 Hyundai Elantra / 2015 Hyundai Elantra / 2016 Hyundai Elantra to get your shifter out of park and into neutral. Tools Needed: 00:18 Flat Headed Screwdriver (Vehicle should come with one. Should be in the same place as the spare tire. In the trunk, under the trunk carpet). 1. Ensure the emergency brake is engaged. 2. Locate the Shift lock release cover which is to the left of the gear shift knob. There should be a label on it that reads &Lock Release& 3. On the Shift lock release cover there is a small notch. Put the screwdriver in this...