K1 Extruder disassembly ... How To Creality K1

A quick tutorial on how to disassemble the Creality K1 Extruder from the toolhead , and how to open it up. i noticed that the main screws of the extruder gets loose , and this makes the filament lock snap out of place easily , so slightly tighten the screws ( no too much so you do not overload the motor ). this might help with the under extrusion. I decided to make a series of videos for the lack of tutorials about the K1 . I hope this helps Kindly consider subscribing and sharing if you find this useful. NOTE: I am not sure if this will void your warranty or not and I hold no responsibility if you deside to follow my tutorial, so do it at your own risk . Thank you. ?️ This is not your typical review; instead, we&diving into the challenges head-on, addressing each one from its unique perspective. The D3vil Design team is hard at work, pushing the boundaries to extract the maximum potential from this 3D printer. ? Stay connected with us on Discord for more updates and to share your questions: Don&forget to like, subscribe, and hit the notification bell to stay in the loop on our 3D printing adventures! ?? . Sponsors links Special Thanks to LDO for the continouse support @ldomotorsjason3488 ---- Huge thanks for @triangle-lab6335 for helping me in the development and experements along the years ---- and to @bigtreetech5117 for sponsoring ---- My Original OT Hotend in collaboration with TriangleLab: ---- My Belts and Idlers ( In collaboration with Powge...