How to clean and to wash the Pressure Multi Cooker REDMOND RMC-M110A

Before cleaning the pressure multi-cooker, ensure that the appliance has completely cooled down. Disconnect the pressure multi-cooker from the power source. Accidentally switching the appliance on while cleaning may lead to serious damage and breakage. Do not immerse the housing in water or wash it under running water! Do not use abrasive or destructive substances or materials with a hard coating for cleaning the appliance. The bowl can be washed either manually or in a dishwasher. To clean the condensation collecting container, carefully pull it downwards and remove it from the housing. Pour out any accumulated liquid and fix the container again onto the housing. Replace the sealing ring. Cleaning the sealing ring is recommended when necessary. To clean the sealing ring, rinse it under warm water and let dry. To clean the steam valve, remove the valve switch on the outside of the lid by pulling it upwards. Next, unwind the protective casing on the outside of the lid and rinse both parts of the valve under warm water. To replace the valve, screw the valve casing and lightly press the valve switch into the lid slot to fasten. To clean the lock valve, carefully wipe off impurities with a soft damp sponge or kitchen cloth. Hold the inner lid and unscrew the nut by rotating it counter-clockwise. Carefully separate the lid from the lever of the link mechanism. Clean the inner lid’s surface and wipe it dry or let dry. To fasten the lid in place, align the hole in the...