How to install Kingston Fury Renegade NVMe with tips and ticks

This is a video on the Kingston Fury Renegade NVMe SSD, showing you how to install the drive both in terms of hardware and the installation in Windows 10 or Windows 11. The process for installing is really easy but may vary depending on your motherboard - some have heatsinks and different screw setups. It's also worth checking your manual as you may find that not all the drives work the same way. Unlike most NVMe SSDs, this one does come with M2 screws in the box! If you lose it or find you don't have one then there's good news as you can buy them from Amazon*: Specs of the build featured in this video: CPU - Intel Core i5-13600K RAM - Kingston Fury Beast 16GB 3,2000 MHz NVMe SSD - Kingston Fury Renegade Gen 4 PSU - NZXT C850 Power supply SSD - Kingston A400 SSD CPU cooler - DeepCool GAMMAXX Series AG400 WH Please note links listed here include affiliate links which may earn me a commission. Find out more below.* 🏆Big thanks to my super awesome YouTube members: SirSpawnsALot, Meatykeyboard, Beaster Bunny, JayShank007, Rawrr483, DStarastins, McFarty, Riggsy79, Chief Hao, Aaron Yarden, Geralt of Rivia, Derrick Townsend and you? 🏆 0:00 Helloooo 0:30 NZXT motherboard 1:40 Installing the install Kingston Fury Renegade NVMe 3:06 Disk management 4:51 Testing the NVMe drive 6:20 BIOS setting for the NVMe 7:11 Advanced BIOS settings 8:28 SATA or SSD problems 8:48 X.M.P 📌 Support the channel: PLEASE NOTE Affiliate links*: Disclosure: Shopping links within the...