Peugeot 308 heater resistor location and removal T7 , 2008-2013

Welcome, In today's video, we will show you the location and removal of the heater resistor from a Peugeot 308 T7. In the process, we will also be removing the glove box. Starting from underneath the glove box there is a cover held on by clips that we will remove. There will be 2 Torx screws under the cover. Next, we will remove and unplug the courtesy light on the inside with a hook tool. On the inside of the glove box, there are 4 torx screws, 3 to the front and 1 to the back of the glove box . Lastly,, we need to remove another cover on the side of the dash and unclip the glove box. There is 1 plug we need to detach from the back of the glove box and another we need to unplug. Now we have access to the resistor. Essentially you will need to unscrew partially the heater core pipes. Not completely removed. Unplug the resistor. On the left of the resistor, there is a release tab we need to pull on and slide the resistor up. And it should slide out. Refitting is following the steps taken in this video in reverse order. Peugeot 308 T7 , 2008-2013 Don't forget to show your support by subscribing :) Best of luck, Carstar Disclaimer Australia is left-hand drive with the steering wheel on the right, this can sometimes make my videos null or void for Right-hand drive countries with the steering on the left - please keep this in mind. Before following any car tutorial, please ensure you have the knowledge, skills, and tools to perform the task safely and correctly.