How to replace LCD Screen on Acer Aspire 5 Model: A515 55. Step-by-step instructions

This is a guide on replacing a screen on Acer Aspire A515-55-55R6 For the replacement process we will need the following tools: - a heat gun - a plastic pick - tweezers - and a Phillips screwdriver To begin turn off the laptop and disconnect the power cord. Start removing the bezel. Start from the left side and go around the perimeter unsnapping the tabs underneath. Put the bezel aside. The screen is held in place by two strips of adhesive on the right and the left sides. We should be able to remove the adhesive by pulling the tabs in the bottom corners. In our case the adhesive strips are tearing apart. So we have to use a Heat Gun to soften the glue. Start warming up the right side of the back cover. Plastic should be warm on touch but not burning. Insert a plastic pick between the LCS screen and the back cover, move it along the edge. Continue warming up the glue. Remove the adhesive strip. Warm up the left side of the back cover. Insert a plastic pick and gently pry off the LCD. Move the plastic pick to the bottom. Place the LCD on the keyboard. Remove the remaining adhesive strip. The video connector is secured with clear tape. Peel off the tape. Open the connector's bracket. Using both hands disconnect the cable. Discard the old screen. Take the new LCD screen and place it on the keyboard. Reconnect the the video cable. Close the connector's bracket. Secure it with the clear tape. CAUTION! It is very important not to force any connectors. As well you must not...