TIA Portal: OPC UA Standard Server Tutorial - Quick Configuration and Browsing

OPC UA Series Step 1 TL;DR - 3:26 - OPC UA Server enablement Properties-OPCUA-Server This is Part 1 of the series, to start by demonstrating what OPC UA is and how to activate a server. OPC UA client (Part 2), and OPC UA server methods (Part 3) will help complete the discussion of the available interfaces. The final section will demonstrate «tuning» these servers and clients, in order to optimize communication loads. Within this video, the PLC is quickly parameterized and launched. SiOME is used as a client browser. The Simatic interface is used for example. In the next video, a custom server interface is built. Starting with firmware V2.6 of the SIMATIC S7-1500 PLC family, an OPC UA client is available. With this extension, you can fully implement M2M communication via OPC UA on a SIMATIC S7-1500 controller. Unlike the controller's OPC UA server, the OPC UA client is programmed with a variety of system function blocks rather than simply configured. The client supports all common security policies and modes, as well as user authentication using a username and password or anonymously. © Siemens AG 2022, All rights reserved, Image and referenced sources 0:00 - Introduction 1:29 - TIAP project start 2:40 - Insert 1500 and quick config 5:52 - Compile and explanations 6:40 - Config Webserver for Diag 8:16 - SiOME as an OPC UA Tool (SIOS) 9:12 - Configure the OPCUA connection 10:12 - Browsing OPCUA with Data Access 11:27 - Subscribing to Events and Diagnostics 14:22...