Hyundai I30/Elantra MAP sensor Location Manifold Absolute Air Pressure Sensor with IAT in Hd

MAP sensor Location ,Hyundai I30/Elantra 1.4 G4FA Engine (Manifold Absolute/Air Pressure Sensor) MAP Manifold Absolute SENSOR 4 wire 39300-2B000  blue point ADG074234 The MAP sensor senses engine load & converts engine vacuum/manifold pressure to an electrical signal so the computer knows how much load the engine is under. This data is the basis for fuel delivery and timing control. Intake Air Temperature Sensor (IATS) is included inside Manifold Absolute Pressure Sensor and detects the intake air temperature. To calculate precise air quantity, correction of the air temperature is needed because air density varies according to the temperature. So the ECM uses not only MAPS signal but also IATS signal. This sensor has a Negative Temperature Coefficient (NTC) Thermistor and its resistance changes in reverse proportion to the temperature. Faulty sensor can result in the Car Lacks power, an imbalance of pressure may result in rough engine performance, most noticeable during acceleration or slowing down, as these are the times when there is the greatest difference between atmospheric pressure and the pressure within the manifold. A rough idle is a common manifestation of faulty MAP readings, delayed acceleration followed by a sudden surge is a common sign of this type of problem. DTC codes P0069 Manifold Absolute Pressure - Barometric Pressure Correlation P0105 Manifold Absolute Pressure/Barometric Pressure Circuit Malfunction P0106 Manifold Absolute Pressure/Barometric...