How to replace LCD Screen on MSI Katana GF66. Step-by-step instructions

MSI Katana GF66 screen replacement guide This is a guide for replacing the screen on an MSI Katana GF66. For the replacement process, we will need: • A plastic pick • A set of adhesive strips To begin, turn off the laptop. Now we can remove the bezel. The bezel is held in place with tabs and strips of glue. Using a plastic pick, pry off the inner edge of the bezel. Using both hands, gently pull the bezel away from the screen, going around the perimeter. Use the plastic pick to separate the bezel on the bottom side, then remove the bezel. Remove any remaining strips of glue. The LCD screen is also held in place with adhesive strips. Using the plastic pick, gently pry off the LCD screen on the left and right sides. Place the screen on the keyboard. Peel off the clear tape from the video connector. Disconnect the video cable and discard the old screen. Place the new screen on the keyboard. Using both hands, reconnect the video cable and secure it with clear tape. CAUTION! It is very important not to force any connectors. Also, make sure not to twist or slant the connector when plugging it in. Your new display may not come with adhesive. We offer standard double-sided tape Use alcohol and a piece of cloth to clean the back side of the LCD and the inner side of the back cover. Apply adhesive strips to the back of the new LCD. Make sure that the video connector is properly secured, then lift the screen up and apply some pressure to the display along the edges to catch...