Suzuki df 2.5 carburetor tuning big jets installation and adjustment

Suzuki df 2.5 carburetor tuning big jets installation and adjustment How to upgrade the jet in carburetor for better performance. In this video you may see how I re-jet the main jet and pilot jet in a for stroke outboard Suzuki df 2.5 h.p. The pilot jet(controls the fuel at idle to about 1/4 throttle)is and the next size up would be not #33. I installed a main jet and pilot jet in the carb and installed the carb back on the motor. Started the motor and let it warm up than adjusted the idle mixture screw. It idled best at 2 turns out and is within the perimeters of the pilot jet so it did need the bigger jet. The manual says idle is 1900 RPM +/- 100 rpm. The pilot jet sits under a chrome plated screw. Take the screw out and you'll see the pilot jet about an inch down the hole. 0:00 Start disassembly of a carburetor on outboard Suzuki df 2.5 0:22 Unpacking the new Jets 01:28 Start replacing Main Jet #66 02:51 Special screwdriver for unscrewing the main Jet 03:52 Drilling the metal cap of the mixing screw on Suzuki DF 2.5 04:36 Removing the mixing screw metal cap 05:22 Unscrew the mixing screw on carburetor Suzuki DF 2.5 outboard 06:26 Disassembly of the upper part of the carburetor Walbro LMK 07:26 New pilot jet 34 08:31 Replacing o-rings on a Suzuki df carburetor 09:29 Installation of the axles and flaps of a suzuki df 2.5 carburetor 11:10 Suzuki df carburetor installation 12.10 Suzuki df 2.5 carburetor settings JET, MAIN (66) *{MODEL:07~ OPT}* 09491-66005 JET...