Как прошить Arduino Pro Mini с помощью Arduino Uno sketch

из Arduino Uno нужно предварительно вынуть контроллер ATMEGA arduino pro mini arduino uno sketch скетч arduino,ir,remote,control,IRremote,library,tutorial,IRremote.h,ик,пульт,Выключатель,света,с,пультом,Управление,практически,ЛЮБЫМ,ДУ,при,помощи,датчика,TSOP31236,ардуино,sketch,скетч arduino pro mini arduino uno sketch скетч New Version Pro Mini 5V 16MHz MEGA328P (Arduino -compatible) It's the Pro Mini! It's thin (0.8mm)!This is a 5V running the 16MHz bootloader ((select 'Arduino Duemilanove w/ 328' within the Arduino software). Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time users start with the Uno R3. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board. We used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance) USB connection off board Supports auto-reset 5V regulator Max 150mA output Over current protected Reverse polarity protected DC input 5V up to 12V On board Power and Status LEDs Dimensions: 0.7x1.3» (18x33mm) Less than 2...