How to replace rear ABS sensor | Peugeot 308,3008,408,5008 | Complete guide

Procedure to replace rear wheel speed sensor for vehicle Peugeot modal 308,3008,408,5008 with complete guide sensor | A wheel speed sensor is used by the anti-lock brakes to determine if a wheel is moving at a different speed than the others in order to control the anti-lock brake or traction control functions. Some makes and models use a single sensor on a single wheel for the speed signal. Some vehicles that have anti-lock brakes use the wheel speed and the transmission output to determine any faults. Most models that do not have anti-lock brakes use the transmission output for the speed signal. If the wheel speed sensor has broken, there will usually be dashboard lights for the ABS or traction control systems illuminated. The ABS system will likely not function properly. Step 1: Prepare your work area. Make sure the vehicle is on a level, safe surface, and you have set the parking brake. Step 2: Loosen the lug nuts. Use a ½ inch drive breaker bar and a lug nut socket set to loosen all the lug nuts before you jack the vehicle up in the air. Step 3: Jack the vehicle up and use jack stands. Jack the vehicle up and put it on jack stands. Place the wheels off to the side, away from the work area. Be sure to jack the vehicle up in the correct location; usually on the sides underneath there are pinch welds you can use to jack from. Then make sure you place the stands on the body or frame and lower it down onto the stands. Step 4: Remove the old wheel speed sensor. In...