Jura E8, E9, E45, E50, E55, E75, E80, E85 Open and Close and Brew Group Replacement

This instructional video demonstrates how to open Jura Impressa E8 espresso machine and replace the brew group. This video instructions can also be used to open Jura C5, C9, F5, F7, F8, F9, F50 and all Jura E series espresso machines. We are doing our best to assist Jura espresso machine owners in fixing their machines. These instructions will help you access the brew group, remove it for cleaning and sanitizing, and self repair it. We encourage do it yourself repairs. We carry all OEM Jura replacement parts such as brew group o-rings, repairs kits, brew group, boilers, grinders, membrane regulators, and various replacement parts. visit our Online Store to purchase Jura parts. Here is the link: 08:17 - Brew Group Removal - Here is the link to purchase the Jura brew group: 0:00 Introduction 0:01 Services Unlimited Inc./Parts Guru presents How to Open Jura Impressa E8, E9 and Remove Brew Group 2:18 Remove the 4 Oval Head Screws using the Oval Head Key. We sell the Oval Head Key to remove the screws 3:36 Remove the Top Cover and both Side Panels. No Need to Remove the Rear Panel. 4:21 Notice the white/green deposits of mold/fungus in the pre-ground coffee funnel due to lack of cleaning. 6:36 Remove the Water Tank Side Panel 8:10 Remove the Torx screw that is holding the water inlet valve, so that you can easily remove the brew group by sliding it out. 9:44 water tank side. Remove the two torx screws from the bean container side using Torx T20 bit. This is required to...