Review: Anycubic "ABS-Like" pro 2 3D printing UV cured resin

Price as reviewed: $19 (for 500g, $29 for 1kg) ANYCUBIC 3D Printer Resin, ABS-Like Resin Pro 2 with Enhanced Strength and Toughness, Performance far Superior to ABS-Like Resin, Low Odor, Wide Compatible for All Resin 3D Printers (Grey, 500g) I tried this resin out on a different brand of 3D printer, so I had to tune in the settings myself. It took me several tries to get it to stop sticking to my FEP film (I had to turn up the exposure time, and also replace my FEP film, as well as stop using "thin" supports). This resin wants to stick to the FEP film more than what I was using previously, and appears to be a little more flexible when printing so that you need to use slightly larger supports to keep fine parts from starting to stick to the FEP film when the built plate lifts. Eventually I got the settings and support structures dialed in so that I could print parts reliably, but it took more more attempts than I was expecting to need, as it needed almost twice the exposure time as my previous resin. The parts printed with the "ABS-Like" resin are definitely stronger than what my previous resin (an "Aqua") gave. It took significantly more force to break off small structures, and parts would "give" more before breaking, although you could still snap small pieces by hand if you bent them enough. The gray color definitely made the IPA I use for rinsing dark and murky at a faster rate than a clear or white would have done, so consider your color choice when buying resin...