How to use AED ?(Automated External Defibrillator)

Аватар автора
Путешествия в душе
How to use AED ? 1.First put the batteries in and then turn it on. 2.The electrode (Pads) was attached to the correct body position 3.Connect the electrode (Pads) cable to the AED 4.First aid was initiated according to the steps prompted by the AED Instruction for safe use (Pads): 1.select placement sites on body of patient according to defibrilator manufacture&operation instructions for anterior anterior electrode placement(1a) 2.Ensure skin site is clean,dry and hairless.Shave if required. 3.Remove electrodes from package(3a) and then remove protective cover from electrodes(3b) 4.apply to patient in a accordance with protocol.Press down firmly to ensure good contact of the entire adhesive surface with the skin. 5.Connect the electrodes to the defibrillator. 6.Proceed with defibrillation/pacing according to defibrillator manufacturer&operating manual 7.Disconnect electrode connector from defibrillator. 8.Remove electrodes by slowly peeling electrode from the patient&skin.Dispose used electrodes following local state of federal guidelines. uDEF 4S Features: -Big screen LCD display -extensive voice and visual prompts for the operator -three step defibrillation process -two button operation -Biphasic energy output -lock-out protection to prevent inadvertent defibrillation -automatic self-test: daily battery condition test&monthly AED whole intersystem test Specification: Machine Index Content Output Biphasic Truncated exponential Energy Sequence(child) 50J,50J.50J...

0/0


0/0

0/0

0/0