Aux Fed Subs Setup For Behringer XR18 X-Air - Midas MR18

Tutorial for setting up your sound system and XR18 / X Air for aux fed subs. Midas MR18 aux fed subs method uses identical setup information as found in this video. Aux Fed Sub Method Software used for mixer control: Behringer X-Air Edit (available for free download from Behringer site) This installment is a bit of a long one with all of the discussion of audio bus sends, crossover networks, DSP, amplifiers, and active and passive speakers. I did this video in three sections that are broken down into: 0:00 Intro 0:20 Setting Up The XR18 For Aux Fed Subs 6:12 Setting Up The Speakers/Amps For Aux Fed Subs 11:46 Tips And Advice For Mixing On Aux Fed Subs Amazon Affiliate Links- Behringer XR18 on Amazon: Midas MR18 on Amazon: Behringer X32 on Amazon: Midas M32 on Amazon: Stellar XT (Narration) Mic on Amazon: If you&familiar with the concept of mixing aux fed subs on an analog console, then the first section might be all you need. It explains how to setup the console for mixing on Aux fed subs, and once you have that complete, everything else should be the same for you. Although, parts two and three might make for a good refresher. If you&wanting to try aux fed subs and have no experience with the concept, then you&probably find all 3 sections informative. The second section explains various system interconnect issues , for your amps and speakers. Also I address some differences between how you would do this on a Behringer X32 / M32 versus some limitations with the...