Step By Step!! 12V 100Ah LiFePO4 Battery Assembly and Test

Method: 3.2V 100Ah LFP Battery Cells-4Series and 1 Parallel Last week we shared the assembly process for the 12V 50Ah Today we would like to share with you the assembly process of the 12V 100Ah battery. What are the steps? What should we pay attention to? How to test the battery? Please check out our video! Timestamps 00:34-Assembly Process 00:37-Place the batteries 00:41-Put the epoxy board between the batteries 00:50-Fix them with fiber tape 01:06-Install signal acquisition wires in sequence 01:35-Tidy up the wires with tie straps 01:48-Put battery pack into the shell and fill EVA cotton 02:18-Install positive power wires to the battery pack 02:29-Secure BMS with thermally conductive tape 02:40-Connect B- of BMS to the negative of the battery pack 02:56-Check the signal lines in the correct order 03:09-Plug signal acquisition wires’ port into the interface 03:34-Fix the temperature measuring probe near the battery pack 03:41-Test voltage of the battery pack 03:45-Install the portable strap 03:50-Charging Test 04:24-Discharging Test We also produce 12V batteries of different capacities, including 30Ah, 50Ah, 85Ah, 100Ah, 150Ah, 200Ah, and 300Ah. OEM/ODM services are available! Applications: system/ community and family system/ tel-com base/ UPS/ medical instrument/ / Note: The li-ion battery in this video is installed and tested by a professional engineer. Please pay attention to safety and install the battery under professional guidance. Thanks for watching!!! If...