BOOST, one of FARDRIVER’s motor protection features: who needs it, how to use it, what it does.

The Fardriver BOOST feature, like the Ratios in Speed settings, are PROTECTION features, not PERFORMANCE features. If you set your controller for TURN AND BURN, BOOST does nothing. It only works if you speed 3 is set correctly, meaning as needed to prototype the entire system from being damaged. The limiting factor for my ebike is the battery. Just during these few tests the battery reached 48c/118F, which is warmer than you think. This pack can only do 25a without getting warm so the 40a and 60a all added heat even with short bursts. And it took a few hours to cool down. 0:00 Fardriver BOOST, another protection feature 0:10 Who needs to use BOOST function? 0:20 How to set up BOOST 0:26 in the normal FARDRIVER, connector pin 6 has the brown boost wire. The 530/680 are abnormal. 0:32 this is the normal connector, the 530/680 is different and causes headaches lol 0:37 in the app we can reassign functions to different wires. But in this case we use Brown wire pin which is hardwired to pin 14 of the CPU 0:40 the dropdown list shows which connector pin-cpu pin combination can be used for boost. 0:48 the boost time can be set as high as 130 seconds. I set mine at 5 seconds. The longer the time, the less boost you should allow 1:03 boost release is the cooldown period. This can be set as long as 130 seconds. It should be long enough to recover from the boost period 1:30 for initial testing, use short times like 5s boost and 10s release so you can get the feel for it. Later you...