ЦВЕТЫ ИЗ ПЛАСТИКА (ПЭТ)\ Big plastic flowers

ВЫ МОЖЕТЕ У СЕБЯ В НАСТРОЙКА ВКЛЮЧИТЬ СУБТИТРЫ К ВИДЕО!!! YOU CAN SET UP THE SUBTITLE TO THE VIDEO IN THE SETTING !!! ПОЛЕЗНЫЕ ССЫЛКИ: ___________________________________________________ Material for the flower - pet (plastic) thickness 1mm. I bought it with a sheet, and cut it into 40 * 40cm squares. For a flower, it took me 12 pet sheets of 40 * 40 cm in size. In order to glue the print on the film on the sheet of PET, it is necessary to remove the protective film from it, sprinkle the PET with glass cleaner. Then glue, and using a rubber spatula to expel all the air and bubbles from under the film. If it is necessary to make the flower pearl, on the reverse side of the petal, we apply a film for the headlights using the same technique. Headlight tinting film is available in various shades, see link above! Leave to dry the petals for 6-8 hours. Then we warm the petals over the building dryer and form the desired shape. For small petals (there are 6 of them) it is necessary to create a stiffener + a platform for screws. For large petals (there are 6 of them), you only need to create a stiffener. Watch videos on how to form them. For the base, I used a circle with a diameter of 15 cm. from composite! I fastened small petals to the upper part, and large petals beneath. And with the help of tongs for rivets fastened them to the base! If you have any questions, please write, be sure to answer! Thank you!!!