how to change stop lamp on Ford Fiesta mk5 #taillight

#tajmotormedics Ford fiesta 2008 Fifth Generation (BE256; 2002-2008) To replace the stop lamp (brake light) on a Ford Fiesta Mk5, you can follow these steps: 1. Open the trunk of your Ford Fiesta and locate the access panel behind the stop lamp assembly. 2. Remove any screws or clips securing the access panel and set them aside. 3. Once the access panel is removed, you should see the bulb socket connected to the back of the stop lamp assembly. Twist the socket counterclockwise to unlock it from the assembly. 4. Gently pull the bulb socket out of the assembly, exposing the bulb. 5. Remove the old bulb from the socket by pulling it straight out. If the bulb is difficult to remove, you may need to give it a slight twist while pulling. 6. Take the new stop lamp bulb and insert it into the socket. Ensure that it is securely seated. 7. Reinsert the bulb socket into the stop lamp assembly and twist it clockwise to lock it in place. 8. Test the new stop lamp by turning on the headlights and pressing the brake pedal to verify that it is functioning correctly. 9. Replace the access panel and secure it with the screws or clips you removed earlier. Please note that these instructions are general guidelines, and the specific steps may vary slightly depending on the exact model year and trim level of your Ford Fiesta Mk5. It&always recommended to consult the vehicle&owner&manual or seek professional assistance if you&unsure about any step of the process. 380 bulb required and...