Reebok fury instapump does not work / FIX in the description

I fixed it, it is relatively easy fix! You need a can with compressed air (it is used for blow off cleaning) and a glue I used LOCTITE Super Bond Pow but any other fast glue can do the job. First fill the shoe with the compressed air can through the hole in the pump (it is in the center of the pumping area a small hole) my shoes appeared to be punched by a stupid person in the shop with a tag gun on the side of the shoes, when you fill it with the compress air can you can hear and see where you have hole in the system! After that I COMPLETELY release the air in the system and glue the 2 holes (one from the outside of the the shoe the other was in the inner side of the shoe) with a tiny drop of glue exactly on the holes because the holes was very tiny this was job done! Easy and fast, they was like a new! I hope this will help you. It is important to use tiny drop of glue because if you use a lot you can damage it further, if the hole is big you need to glue a patch but will be ugly and ridiculous if it is on the inner side where you can not see it is OK but if it is visible you have to be creative so to blend it with the color of the shoe.