How to replace a Cooker hood extractor lamp bulb G4 12v 20 watt halogen light

? Cooker hood G4 Bulbs ▶ Bosch Neff & Siemens Full diagnostic cooker hood video ▶ Hotpoint, Indesit, Ariston, Whirlpool Full diagnostic cooker hood video ? Cooker hood parts #20w This is quite an easy job you will need a small flat blade screwdriver to be able to prize the stainless steel rim away from the light fitting be very careful when doing this as you may damage the glass at this point you really want to disconnect the electricity supply as if you accidentally touch anything lonely with the fitting when removing the bulb you may cause a short and therefore do damage to either the circuit board all the transformer. Once you have disconnected the power with your fingers slide the bulb backward away from the fitting and the two prongs that attach to the bulb will come out you can check the bulb visibly making sure that the filament is attached to the bulb correctly or make sure the bulb is not black as these are clear signs that the bulb may have blown. Replace the bulb with a new one making sure that you do not touch the glass with your fingers and also make sure it&clean before handling it as any grease that may be on your fingers can cause the bulb to blow so I suggest using a piece of tissue when handling the bulb insert the bulb carefully into its location pushing only softly once it is fully inserted into the holder you are then able to reconnect the power and test the bulb before replacing the glass cover to the light fitting there are more detailed videos on...