Bambu Lab A1 Combo - AMS 3D Printer - Unbox & Setup

Bambu Lab A1 Combo 3D Printer The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy. Full Auto Calibration The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically. Quick Swap Nozzle All-new quick swap hotend design, the hotend pops in and out with just 1-Clip. Sync with Bambu Studio and Bambu Handy Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos. Active Motor Noise Cancelling 256*256*256 mm³ Build Volume Build Volume(W*D*H) 256*256*256 mm³ Hot End All-Metal Stainless Steel Nozzle Max Hot End Temperature 300 °C Nozzle Diameter 0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm Bambu Textured PEI Plate (Included) Bambu High Temperature Plate (Smooth PEI) Bambu Cool Plate Max Build Plate Temperature 100°C Max Speed of Tool Head. 500mm/s Max Acceleration of Tool Head 10m/s² Supported Filament PLA, PETG, TPU, PVA Ideal ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer Not Recommended Sensors Chamber Monitoring Camera Low Frame Rate Camera (Up to 1080P) Timelapse Supported Filament Run Out Sensor Power Loss Recover Filament Tangle Sensor Physical...