How to change front springs on VW SHARAN 1 [TUTORIAL AUTODOC]

How to change front springs / coil springs / suspension springs on VOLKSWAGEN SHARAN 1 (7M9) 1.9 Minivan 2000–2010 [TUTORIAL AUTODOC] Springs on SEAT Alhambra I (7V8, 7V9) (Baujahr 04.1996 - 03.2010) cars should be changed, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design. ? Buying via app is always cheaper than on the website! 00:00 — VW SHARAN – springs / coil springs / suspension springs: step-by-step changement tutorial 02:08 — Unscrew the fastener connecting the stabilizer link to the shock strut. 04:03 — Release the lower fastener connecting the shock strut to the steering knuckle. 05:58 — Install the upper strut mount and the strut mount bearing. 08:24 — Tighten the fasteners that connect the ball joint to the steering knuckle. 10:27 — Tighten the upper fasteners of the suspension strut mount. Was this video helpful? Give it a thumbs-up and share it with your friends! Have a look at other videos on our channel: ? AUTODOC on social media: #autodoctips Disclaimer: This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage...