How to clean your Dyson V8™ cordless vacuum's filters

(Сменный многоразовый моющийся фильтр для Dyson V12 Обнаружение Slim 971517-01 аксессуары для пылесоса запчасти бытовой инструмент для очистки) Внимание! Если ссылка ведет не на тот продукт, который Вы искали, воспользуйтесь поиском по сайту! How to wash your Dyson V8 cord-free vacuum&filters. In normal use, both filters should be washed at least once a month. Use tap water without detergent, and allow both filters to dry for at least 24 hours, in a warm place with plenty of airflow. Check the filter is completely dry before refitting, or it could damage the motor. Step 1. Lift the pre-filter out of the cyclone assembly. Step 2. Rotate the post-filter anti-clockwise until the two solid black dots line up and pull the post-filter off the back of the machine. Step 3. Wash both filters with water only. Step 4. Turn the pre-filter upside-down and tap to remove any excess debris. Step 5. Run water over the inside and outside of the pre-filter then tap and shake the filter to expel all debris. Step 6. Repeat the process until the water runs clear. Step 7. Squeeze and twist with both hands to make sure the excess water is removed. Step 8. Run water into the open side of the post filter then tap and shake the filter to expel all debris. Step 9. Repeat the process until the water runs clear. Step 10. Leave to dry for at least 24 hours, in a warm place with plenty of airflow Step 11. Ensure the filters are completely dry before refitting into the machine, or it could damage the...