Router/Repeater/AP Mode Installation/Setup Guide Wavlink WN523N2 300Mbps WiFi Range Extender

Subscribe to the Wavlink YouTube channel for more Tutorials,Product Tours, Speed Tests, and much more! WN523N2 signal amplifier has both routing and relaying functions. If it is in the repeater mode, it is not necessary to connect the network cable, but if it is in the router mode and AP mode, you need to pay attention to the network cable before setting. In router mode, you need to connect the network cable from the upper-level modem to the WAN port of WN523N2; in AP mode, you need to connect the upper-level router&LAN port and WN523N2&LAN port with a network cable. In addition, when setting the router mode, you need to choose one of the three networking methods of PPPoE, Static IP, and Dynamic IP. If you use PPPoE to access the Internet, you need to enter the broadband account and password provided by the operator. Finally, when WN523N2 uses the repeater mode to expand the network, you need to pay attention that no matter what, the wireless network is actually very susceptible to interference and obstructions such as metal objects, electromagnetic equipment and other network equipment. Therefore, It is necessary to place WN523N2 in an open location as much as possible, and WN523N2 needs to be able to stably receive the wireless signal of more than two grids from the superior router at all times, so as to maximize our networking experience. Learn More about Cutting-edge technology and products here: Welcome to Wavlink Official Website: Follow us in other social medias...