Samsung GT-I8268 ISP Pinout Jumper Ways Format FRP Boot Repairing By GSM Free Equipment

Why do we need Samsung GT-I8268 Pinout? Just Like “Joint Test Action Group (JTAG)” there are specific contacts that will be of interest to the examiner. But unlike JTAG, the contacts are directly off the chip BGAs and do not go through the processor. Acquires data much faster than JTAG, enabling examiners to process more phones faster. CMD CLK DATA0 GND VCC – Voltage Supply for Core (3,3V) VCCQ – Voltage Supply for I/O (1,8 – 3,3V) Requirement Tools Microscope Miro Solder Solder Paste 0.1mm Copper Wire eMMc Flash Box (Easy JTAG Plus, Ufi Box, Medusa Pro, Etc) How To Remove Samsung GT-I8268 User Lock FRP Using UFI Dongle: Remove the back panel of the device and connect the wire to the ISP Pinout. Next, connect the correct ISP Pinout to the UFi Box Check “Direct eMMC (ISP)” Then Click on “Identify eMMc. Connect your Realme C11 to the PC via a USB cable. Head over to the PC and open Device Manager. If your device is located there, run the UFi Box. UFI EMMC User Partition Go to USERAREAPART Now Click on Special Task ► [Oppo] MasterClear ► Wipe Data Only Now Click on Special Task ► Clear FRP Lock Done.