Volvo XC60 Diesel Fuel Filter Replacement Step by Step

This video explains how to replace the diesel fuel filter and bleed the fuel system on a 2011 Volvo XC60 D3. The procedure should be the similar on most diesel Volvos of this era. Please note: If don’t use ramps, but instead Jack up the vehicle the suspension will drop restricting removal of the filter Bowl. (Kindly pointed out by Peegee in the comments) —————————————————— ? PARTS USED IN THIS VIDEO ? Please make sure you purchase the correct parts for your specific make and model of vehicle, they may differ from the vehicle in the video. This is an affiliate link so I will receive a small commission at No extra cost to you. —————————————————— Tools and parts required: 1 - 32 mm ring spanner or socket for fuel filter housing2 -17 mm ring spanner for the fuel drain 2 - Torque wrench (recommended if you are unsure tightening the housing) 3 - Container to hold the old fuel within the filter 4 - Hose to connect to the fuel filter drain (not completely necessary but it will reduce the mess) 5 - New fuel filter (new seal will be included with the new filter) 6 - Means to raise the vehicle safely, allowing access. ie Ramps - Jack - Axle stands Chapters 0:00 - Fuel filter location and introduction 0:20 - Draining the fuel filter 1:05 - Removing the filter bowl and old filter 1:50 - Replacing the seal 2:15 - Installing the new filter and bowl 3:00 - Bleeding the fuel system Thanks again for watching and I hope you found this video useful. #DIY