HOW TO SETUP NETGEAR N150 Wireless Router JNR1010 | Mywifiext Help

In this video, you will learn how to set up your NETGEAR N150 Wireless Router JNR1010 in an easy way. Step 1: Unplug the power to turn off your modem. Step 2: Connect one end of the blue Ethernet cable to your modem and the other end to the Internet port on your router. . Step 3: Plugin, then turn on your modem. Note:- Wait approximately 2 minutes until your modem turns on. If your modem has a battery backup, first remove and reinsert the battery before connecting your modem to power. Step 4 Connect the power adapter to the router, then plug it into an outlet. Note:- If none of the LEDs turn on, make sure that the Power On/Off button is in the ON position (pushed in). Wait until the wireless LED turns solid green. Step 5: Connect the router to your computer. Step 6: Open a browser. Connect Wireless Devices to Your Router Choose either the manual or Wi-Fi Protected Setup (WPS) method to add wireless computers, and other devices to your wireless network. Manual Method 1. Open the software utility that manages your wireless connections on the wireless device that you want to connect to your router (iPhone, laptop, computer, gaming device). This utility scans for all wireless networks in your area. 2. Look for the preset NETGEAR wireless network name (SSID), and select it. The preset Wi-Fi network name (SSID) is located on the product label on the bottom of the router. Note: If you changed the name of your network during the setup process, look for that network name.