Easy Valve Check & Adjustment on The Royal Enfield Interceptor & Continental 650 Twin

Hello and welcome, today I&performing the 300 miles first service on my 2022 Royal Enfield Interceptor 650. This is a great tutorial for any novice mechanic. I will be covering tappet adjustment and oil and oil filter change. I have time stamped each process. As you can see I have covered 306 miles. I do encourage owners to work on there machines because it gives you a better connection of the motorcycle, however I cannot guarantee this will not effect your warranty, but please proceed at your own risk. Valve Adjustment: 0:36 Oil & Oil Filter Change: 9:35 Tools Required: 15:38 Road Test and final verdict: 16:20 First thing you want to do is put the bike on its main stand like so We are doing the tappets first so make sure your engine is completely cold and hasn&been started up for at least 6 hours. Remove the right side panel pull the lever and remove the seat unscrew these 2 10mm bolts to remove the fuel tank put all your bolts in a safe, clean place lift the rear part of the tank and slide back get someone to hold the tank while you pull of the 2 breather hoses, full pump plug, fuel hose and fuel level sensor the main fuel house is a push fit clip, so you need to squeeze both outer sides of the pipe end and pull the pipe up at the same time here is what the connections look like, main fuel line. the 2 two breather pipes, the fuel pump plug and the fuel level sensor plug all have pull tabs to release put the tank in a safe place out of the way now remove both spark...