CYMA Platinum M4 Gate Titan Install | CM097

Watch my teardown video to get the gearbox stripped down to this point. I used a rotary tool with a cutoff wheel for most of the removal and a small endmill to clear the corner, a stone bit would work as well. Do not allow the metal dust to enter the bearings, either remove or cover them, be sure to remove all of the dust/filings before reassembly. This mod could be done with jewelers files but would take much longer. All relevant install instructions from Gate apply. Relevant gate titan basic settings were: active brake on adaptive, 20% works too but it stops a little after the cycle completes at a mid-ish precock gears on high speed selector on safe binary auto firmware version 3.0 beta 04