MadVR setup for HDR UHD Dynamic Settings for all HDR TVS mastering NITS

Update: Make sure the resolution in MPCBE is set to 29.o76 not 59hz or you will get a ton of dropped frames in madvr. To check press control J to view. Add entries for 24p (fps) example 23-24.99 to get 0 dropped frames for movies! You can use Madvr(buggy) or Mpcbe(works perfect) to do the frame rate switching. Just DONT USE BOTH!, one or other. For hdr users go online and fins out your hdr candle nit adv. And set it to that. I set mine eventually to 390nits as this is the max hdr light level for my TV. Havin control over local dimming makes pixel shader math a must. It is actually better to set TV to bt2020 and madvr to pixel shader math and your max nit level for you panel then for hdr to turn on on your TV. I know this is as backwards buy you get the nice colors and light levels but are duller in hdr mode! In mpcbe set 23-24p in the fullscreen options to trigger the tv to 24hz for uhd movies...... Managed to get HDR levels on my HDR TV which is rated at 418nits in HDR mode. This is how I did it! The results match my Samsung HDR player now........ Rule of thumb start at 120nits and work your way up. I can go as high as 418nits as my hdr tv supports this. Other tvs may even go higher! My hardware: AMD RX470 video card hdr compatible Sony XBR 850C HDR Compatible TV MadVR latest offering LAv filters Latest Offering MPCBE 64bit Latest offering Windows HDR tab off and display set to 1080p (For normal desktop viewing) MPCBE switch UHD resolution on playback to match 4k...