MKS DLC32 V2 with LightBurn, M7 and AirAssist

Аватар автора
Физический Фуллфуллфулл
Today a small test setup with a DLC 32 V2.0 Connected to it a Mosfet, the AirAssist from SainSmart and is switched via M7 from LightBurn. Hardware-Wiring: This function is much easier and direct to switch when the laser begins to cut or engrave. More about diode lasers can be found on my website Have Fun : )

0/0


0/0

0/0

0/0