SCULPFUN CAM500 LightBurn Camera | Reduce Your Engraving Time by 50% In LightBurn!

Аватар автора
Furniture Fixes
Suitable for ALL the Sculpfun&Laser Engravers! MAIN FEATURE FOR THE SCULPFUN CAM: 📌*Recommended for full functionality of the Sculpfun CAM with limit switches!! When calibrating, the light source should be sufficient, not one-sided light. If used in an enclosure, lights are required on all sides. It is also possible to calibrate the camera outside the enclosure. Just remember when placing the enclosure, be careful not to move the camera. 1. Industrial Camera for Laser Engraver: This industrial assist camera is specially designed for laser engraving machines, which fully matches with the lightburn software. With a true high-definition 5MP, this laser camera can capture clearer images and identify more accurate positioning. 2. Precise Positioning: The SCULPFUN CAM500 camera is perfectly fit with the CAM function of the Lightburn software, which can identify the position of engraving objects via the camera, with a positioning deviation of less than 1mm. 📌*Notice: The recommended height from the camera to the engraving position is 325mm. With the camera well aligned, please make the objects as close to the center of the camera as possible, within the 400*400mm working area. The precision will be decreased as the engraving objects are moved away from the camera center. 3. Engraving Position Controlling: With the Sculpfun CAM500 Lightburn camera, you can move the pattern onto a certain position of the material through the lightburn software interface. After the setting is...

0/0


0/0

0/0

0/0