Replace Air Suspension Compressor - Range Rover Sport or LR3 (Suspension Fault)

▼Parts and Tools Listed Below▼ How to replace a EAS air compressor assembly on a Range Rover Sport or LR3 2005-2009 to alleviate the "Suspension Fault Normal Height Only" error. Your suspension fault may be caused by a faulty air compressor if you have the fault code C1A20 "pressure increases too slow when filling reservoir". This replacement was one of the very first repairs I did on my car, and was required when the vehicle was about 7 years old. It may be possible to complete the repair for free or around 30$ if you buy a air dryer rebuild, but it&likely you will need to replace the entire assembly to alleviate your problem. Parts required: I recommend getting a OEM Hitachi compressor because these will last about 70K miles, these will be $500-700 unfortunately, part Tools required: 13mm socket or wrench (for battery terminal) 10mm socket or wrench (for plastic housing) 4mm Allen key (for the 3 bolts holding the assembly to the bracket) Optional items: Works with RRS or LR3 MY 2005, 2006, 2007, 2008, 2009 #landrover Disclaimer: Due to factors beyond my control, I cannot guarantee against improper use or unauthorized modifications of this information. I (Hazy) assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I (Hazy) recommend safe practices when working on vehicles and/or with tools seen or implied in this video. Due to factors beyond my control, no...