Fix USB 3.0 not active Enable BIOS xHCI Mode for USB 3.0 Get Super Speed USB

xHCI mode work for Windows 7 8 10. Specially motherboard have addtion USB 3.0 Chip. May be need enable via BIOS Different OS Windows, different Intel Chipset Check version before download. 00:00 USB 2.0 Old Motherboard only show USB 2.0. But have 2 chip USB 3.0 like AV Media or VIA VL 00:25 Setting USB 3.0 If motherboard not support USB 3.0, but using chipset from AV or VIA. Must enable from BIOS Motherboard Go to Peripheral setting Find xHCI and set Auto 00:44 Save and Reboot 01:00 USB 3.0 Active You can see from Control Panel, click USB 2 addition from USB table, Intel USB 3.0 eXtensible Host Controller and Intel USB 3.0 Root Hub. 01:15 Free Device Monitoring Can check via software, if port already active with USB 3.0 connection Specially older motherboard like Intel don&have USB 3.0 But Motherboard manufacture add USB 3.0 chip controller. Must set enable from BIOS, setting via xHCI mode Enable or Auto. Using USB 2.0 only get speed 480Mbits or about 50MB/s Using USB 3.0 Super Speed get 5Gbits, speed tranfer more than 100MB/s WIth USB 3.0 suitable hardware tranfer like USB Display via USB 3.0 port BIOS Setting USB 3.0 xHCI and a few setting XHCI Mode = Disabled - The on-board USB 3.0 port function like a 2.0 port XHCI Mode = Enabled - The on-board USB 3.0 port function like a 3.0 port XHCI Mode = Auto - The on-board USB 3.0 port function like a 2.0 port before OS USB 3.0 driver load. If you reboot the OS, the on-board USB 3.0 port again function like a 2.0 port during...