How to Replace the Engine Oil in a 3 2L Volkswagen Touareg

How to Replace the Engine Oil in a 3 2L Volkswagen Touareg Tools Needed: 7 quarts of oil Oil Filter 19mm Open ended wrench 36mm socket Socket extension 6mm hex T-27 torx bit Procedure 1. Belly Pan removal. There are 6 torx screws. Remove the rear most belly pan. On your back looking up, the left black piece is the oil filter housing and oil filter housing drain plug. To the right it is the oil pan drain plug. Using the extension and the 6mm hex socket, remove the drain plug of the oil filter housing. A steady flow of oil will come out for a minute or so. Replace the drain plug and 4. Oil Filter housing removal Use the 36mm socket and extension to remove the oil filter cap. Once this is removed, snake the housing cover and old oil filter out. 5. Oil Filter and o-ring replacement Replace the O-ring from the bottom of the oil filter housing cap and pull the old oil filter out by pulling away from the housing Install the new oil filter by pushing it firmly back into the housing. Also note the new O-Ring installed. Installation is reverse of removal 6. Oil Drain Plug Removal Use a 19mm open ended wrench or if you have a slim 19mm socket to remove the drain plug. Remember, lefty loosey righty tighty. Replace the drain plug and tighten. Replace belly pan. 7. Pour oil into the engine...you&done!