Evolis Agilia | Advanced cleaning

Follow the instruction to do an advanced cleaning of your Agilia card printer. For a more in-depth clean, we recommend carrying out an advanced clean every five regular cleaning cycles. Maintenance accessory needed: Adhesive cleaning card with 2 adhesive-free zones, impregnated T-card (use just after the bag is opened), and cleaning swab impregnated with isopropyl alcohol. Cleaning the cassettes 1. Press the push button twice. The cleaning wizard is displayed on the LCD touchscreen. 2. Open the card feeder and remove all cards present in it. 3. Set the card thickness selector on 50mil – 1.25mm. 4. Close the card feeder. 5. Open the door of the printer, remove the cassettes and put them on a flat surface with their pins facing up. 6. Remove the printing ribbon and retransfer film from the cassettes. 7. Take a swab, press the middle so that the cotton is impregnated with alcohol. 8. Rub all the pins of each cassette. Cleaning the print head 1. Locate the print head. 2. With the same swab, rub the black dotted line of the print head. Cleaning the printer 1. Insert the T-card into the rear output slot. Cleaning starts. 2. When the printer ejects the T-card, remove it. 3. Remove the film from the adhesive card and insert the adhesive card into the rear output slot (adhesive side up). When the cleaning is over, the used adhesive card is ejected into the output box. 5. Put the cards back in the card feeder, reset the card thickness selector and close the card feeder. When the...