VFD Spindle Control via OpenBuilds BlackBox Controller and Software

Here is a tutorial on how to setup your VFD and OpenBuilds BlackBox to accept control from the OpenBuilds Control Software. Follow the wiring in the video above. *****DISCLAIMER****** These settings work and have only been confirmed to work with the 1.5Kw, 110v, 24,000RPM Spindle and HY01D511B VFD Controller! I have not tested these on any other VFD or with any other Spindles! Please take caution if using these settings with any other VFD/Spindle Combination. I take no responsibility if you fry your stuff!!! *****END DISCLAIMER***** Here are the VFD Settings. Do set these in this order: PD013 = 8 PD001 = 1 PD002 = 1 PD005 = 400 PD004 = 400 PD008 = 110 (This is for 110V systems. If you are using 220V set this to 220) PD024 = 1 PD070 = 0 PD072 = 400 PD144 = 3000 Set GRBL settings in OpenBuilds Control software to the following: $30 = 24,000 (or whatever your maximum RPM setting is of your spindle) $31 = 0 Link to my Spindle and VFD: Link to AirPump: Links to other info I used to help figure this out: Here are links to download the different GRBL Post Processors that include the 8 second pause:  Let me know if you have any questions in the comments below!