Coelbo Switchmatic 1 T KIT Review

T-KIT Switchmatic is an electronic pressure switch integrated in a 3-ways fitting with a digital pressure gauge. It can manage the start and stop of single-phase electric pumps up to 3 HP (2,2 kW). Cut-in and cut-out pressure implementation can be set easily and accurately through a users friendly control panel. Wiring is carried out identically to a conventional electromechanical switch. It can operate as a differential pressure switch and as an inverted pressure switch. There is an internal non-return valve. OPERATING CHARACTERISTICS Electronic pressure switch integrated with a 3 ways fitting. Inner non-return valve. Sleep mode with low power consumption. Inner pressure transmitter. Integrated pressure gauge with bar and psi instantaneous display. User-friendly control panel with 3-digit display, led-lights, and push buttons. Dry-running protection by current (for type T-KIT Switchmatic 2) and for minimal pressure (for type T-KIT Switchmatic 1). ART function (Automatic Reset Test). If the device has been stopped due to the action of the safety system against dry operation, the ART tries to connect the pump, with a programmed periodicity because the water supply could have been restored. Overload protection (only type T-KIT Switchmatic 2). Rapid-cycle alarm: when the hydropneumatic tank has lost the air and frequent start-stops are produced an alarm is activated and is delayed the start. Manual start. Operation modes: differential, inversed differential, and synchronized...