Evolis Zenius | Installation

Discover how to quickly install your Evolis Zenius card printer. 1. Connecting to the power supply Once you have unpacked the printer and its accessories from the box, connect the power cable to the power supply unit and plug the power cable connector into the printer. Next, plug the end of the power cable into an earthed power socket. The printer is powered on: the control panel lights up showing the printer is working properly. Under no circumstances should you connect the USB data cable before installation of the printer driver is complete. 2. Install the printer driver On PC: insert the CD-ROM into your computer and select the printer driver menu. A program will guide you through the entire installation process. On Mac: insert the CD-ROM into your computer and double-click on the .pkg format that will launch the driver installation on your computer. 3. Connecting the printer to the computer Once the machine has been installed on the computer, connect the USB cable to the computer and printer. 4. Installation of the ribbon Open the printer cover and insert the ribbon. Close the cover and press until a click is heard. The ribbon positions itself automatically. 5. Installation of the cards Open the card feeder. If necessary, adjust the gauge lever from right to left depending on the thickness of the cards used, from 0.25 to 0.76 mm. Insert cards into the feeder (capacity: 50 cards maximum of thickness 0.76mm) Note that the cards are printed on the upper face. Close the...