2017-2019 Toyota Highlander transmission fluid change UA80E *the right way to fill*

Fill plug: 24mm, 36lb-fts Drain plug: 10mm hex, 36lb-fts Level check tube: 6MM hex (hand tight only) wheel lugs (76ft-lbs) Quinn 3/8" Drive Torque Wrench: *or* These are both the same scanner: Target temp: 95F-113F (35C-45C) 0:37 what vehicles does this apply to? 1:55 tools and supplies needed 1:57 the fluid I&using 2:22 back to tools 3:17 removing the wheel 3:28 removing the plastic cover in the wheel well 3:50 loosening the fill plug 4:43 removing the drain lug, fill level tube and draining the fluid 6:39 reinstalling the fill level tube 7:23 refilling with 1 gallon of new fluid 8:22 reinstalling the fill plug (24mm, 36lb-fts) 8:42 reinstalling the plastic cover 9:07 using the scanner to check temperature: 95F-113F (35C-45C) 9:54 reinstalling the wheel 10:11 with it running, draining the excess fluid 10:48 reinstalling the drain plug (36ft-lbs) 11:05 torquing the wheel lugs (76ft-lbs) As an Amazon Associate, I earn from qualifying purchases. For your convenience, I try to post links to everything I use in the video description. That&part of how I cover the costs of this channel. I appreciate your support buy using these links!!