P0010 Code - Intake Camshaft Position Actuator Solenoid Control Circuit

P0010 Code - Intake Camshaft Position Actuator Solenoid Control Circuit |Code P0010 Possible Causes NOTE: The causes shown may not be a complete list of all potential problems, and it is possible that there may be other causes. Dirty Oil Low engine oil level Faulty Intake Camshaft Position Actuator Solenoid Intake Camshaft Position Actuator Solenoid harness is open or shorted Intake Camshaft Position Actuator Solenoid circuit poor electrical connection Faulty Engine Control Module (ECM) |What are Code P0010 Possible Symptoms? Engine Light ON (or Service Engine Soon Warning Light) |Code P0010 Description The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to the Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module. The control module sends a pulse width modulated 12-volt signal to a CMP actuator solenoid. The solenoid controls the amount of engine oil flow to a CMP actuator. The CMP actuator can change the camshaft angle to a maximum of 25 degrees. The control module increases the pulse width to accomplish the desired camshaft operation.