SR25 | KAC M110 SASS | AR10 | Polarstar Kythera HPA Build Part 3: The One With Too Many Mistakes

This is the story of how I went about building this SR25 from scratch. 彡??????????????????彡 ________________________ I found this frame for 50 locally. It was HPA&but the previous owner put the wolverine into a smaller M4. I decided to rebuild the SR25/AR10/M110 back - first i looked into finding new parts but quickly realized that i&spend over 200 dollars on rebuilding the gearbox... This is the story of how I went about it. Subscribe for more! Scope cam arriving soon - will show this puppy in action in part 3! 0:00 intro 0:30 "The One With Too Many Mistakes" 5:46 Outro Comments, questions, suggestions welcome! _______________________________________________________________________ Parts List: SR25 body and mags (used) Polarstar kythera Maxx Model ME hopup for v2 modify flat hop rubber/buckng HS armory 503mm barrel with rhop magpul moe fixed stock Novritsch 1-4x scope (not pictured) ScopeCam 2 4k (not pictured) _______________________________________________________________________ Tools Used: -Hex Bits Set -3mm for most, 2.5mm for others. -0.05" for the grub screws in the kythera trigger assembly -Drill Bit 2.5mm -3mm tapping bit -Philips screwdriver (a 6" or longer recommended for butt-stock screws) -Flat head screwdriver -Dremel and assorted bits (not sure of the names) -round sanding drum -wire wheel - round cutting wheel (to cut down the spring guide for the hose to fit easily) -clamps -heat gun...