Evolis Primacy Card Printer Quick Start Guide

This guide will enable you to quickly get started with your printer when you run it for the first time. - Once you have unpacked the printer and its accessories from the box, connect the power cable to the power supply unit and plug the power cable connector into the printer. - Next, plug the end of the power cable into an earthed power socket. - The printer is powered on: the control panel lights up showing the printer is working properly. - To install the printer driver, insert the &software & documentations&CD into your computer and select the print driver menu. A program will guide you through the entire installation process for the driver. NB: it is essential install the printer driver before connecting the printer to the computer via the USB cable. - Once the machine has been installed on the computer, connect the USB cable to the computer and printer. - Open the printer cover and insert the ribbon. - Close the cover and press until a click is heard. The ribbon positions itself automatically. - Open the card feeder. - If necessary, adjust the gauge lever from right to left depending on the thickness of the cards used, from 0.25 to 1.25 mm (10 to 50mil). - Insert cards into the feeder (capacity: 100 cards maximum of thickness 0.76mm) Note that the cards are printed on the upper face. - Close the feeder. - Run a print, the printed cards are delivered to the output hopper (capacity of the hopper: 100 cards maximum of thickness 0.76mm). To remove the printed card, open the...