How to Change the Fuel Tank on a Hatz 1D42S Engine | L&S Engineers

Аватар автора
Идеи для обустройства дома: светотени и освещение
In this video, we show you how to change the fuel tank on a Hatz 1D42S Engine. Click here for a full list of parts, tools & transcript! Tools: Locking Pliers: Pliers: Parts: Fuel Assembly Parts: Fuel Tank: Health & Safety Warning Please ensure that you have safely prepared the machine and work space. If you are unsure about any aspect of the task please seek professional advice. Transcript Today we are going to Change the Fuel Tank on a Hatz 1D42S Engine. Firstly before removing the tank, you can check the fuel cap. To do this check the internal seal for any wear or tear. You may also want to drain the tank before you change or remove it. To do this you will have to unscrew the hexagon nut underneath the tank with a spanner. Let the diesel drain into a suitable container. To free the top of the tank, you will need to use a Hex Socket Spanner to remove the two nuts, spring washers, bracket, metal washers and the rubber washers. To release the bottom of the tank, use a Hex Socket Spanner to unfasten the two screws, then remove the washers from either side, follo wed by the bush located at the back of the tank bracket. Before freeing the tank, you will need to release the fuel hose. To stop any spillages, place long nose locking pliers over the fuel hose. (Tip: place a drip tray underneath to catch any spillages). Prise the hose slowly from the fuel filter with pliers. Then at the back of the tank remove the other hose. The tank can now be removed from the engine.

0/0


0/0

0/0

0/0