DDS AD9959 Arduino Shield RF Signal Generator 4 Synchronized DDS Channels 225MHz, @600 MHz Low Spur

DDS (Direct Digital Synthesis) Analog Devices AD9959 4 Synchronized DDS Channels Arduino Shield Easy connection to Arduino MEGA 2560 without additional wires and converters All functions of the DDS AD9959 are brought to the contacts of the Arduino MEGA With this you can fully reveal all the capabilities of the DDS AD9959 Shield PCB, Design, Schematics, Case and Software made by GRA & AFCH Key Benefits: Convenient and fast control with an encoder. 4 synchronized DDS channels 225MHz @ up to 600 MSPS Low harmonics no more than -60 dBc. An output RF transformer is used for the correct operation of the current mirror. Small spurs. 4 layer board. Signal lines TOP and Bottom, inner layers Ground and Power. Low Noise LDO Stabilizers. Separate power supply for all analog and digital lines (1.8V and 3.3V), 5 pcs IC voltage stabilizers are used. Additionally, there is an RF Ferrite bead interchange. High-speed decoupling Level converter and TTL 5V matching. Types of possible reference oscillators (choose one of them in the selector): XO – Crystal 25 MHz 20 ppm internal oscillator with PLL up to 600 MHz. TCXO – 40MHz (Supports 10 – 50 MHz) 1 ppm external oscillator PLL up to 600 MHz. REF CLK IN – external reference clock input, up to 600 MHz. (this source is NOT INCLUDED). Features: At the output of each channel is a transformer to reduce even harmonics. Additionally balancing transformer is used for XO, TCXO and REF CLK IN options. Easy to connect OLED display. Device...