2012 NISSAN JUKE - Headlights and Exterior Lights

Headlights and Exterior Lights To turn ON your front parking lights, tail lights, license plate light and instrument panel lights, turn the headlight switch to THIS position. To turn ON the front headlights, turn the switch to THIS position. All the other lights will stay ON. To turn ON your high beam headlights, push this lever forward. Pull it back toward you to select low beam. To make your high beam headlights flash ON and OFF, pull the lever toward you and release it. To signal turns, move it upward for a right turn, down for a left turn. When you&completed the turn, the signal cancels automatically. To signal a lane change, push this lever lightly up or down, not as far as for a complete turn. Fog lights create a wide beam pattern, focused lower than the headlights. This minimizes reflected light and helps you see better in foggy conditions. If your vehicle is equipped with fog lights, here&how to activate them. Your headlights must be ON and low beam selected. Then rotate the switch to THIS position and your fog lights will come ON. Turn the switch to OFF to return to low beam and deactivate the fog lights. If you turn the high beam headlights ON, the fog lights will automatically turn OFF. If your vehicle is equipped with the Autolight system, you can preset the headlights to automatically operate based on exterior lighting conditions. To activate this system, simply turn the headlight switch to the AUTO position, then turn ON the ignition. To turn the system...