Ford Escape - Reset / Clear TPMS Tire Pressure Light (2008-2012)

Step-by-step guide on how to relearn / remove / train TPMS Tire Pressure Monitor System Light on Ford Escape SUV ( 2008 | 2009 | 2010 | 2011 | 2012 | XL | XLT | LIMITED | HYBRID ). This procedure of clearing and resetting tire pressure sensor fault message is meant for Ford Escapes with standard ignition. If you have a push button start, process to enter tire learn mode is a bit different. I will make a video on that once I get an Escape with push button start. Inflate all tires before starting the tire training. You will need a tpms diagnostic tool to complete the tire relearn. Follow this steps (as shown in the video): 1. Insert the key into ignition lock, press and release the brake pedal 2. Turn key 3 times from OFF to RUN and leave it in RUN position 3. Press and release the brake pedal and turn the key to OFF position 4. Turn key again 3 times from OFF to RUN and leave it in RUN position 5. Horn will sound which means you are in train mode 6. Use diagnostic tool to train each TPMS sensor starting from driver front side wheel 7. Horn will sound after each TPMS sensor is trained, once you complete all four training is done 8. You will get a message Training Complete! Thanks for watching. Don&forget to Subscribe and Like if this video was helpful! ⚠ DISCLAIMER: While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the...