How to Replace Fuel Pump Module Assembly 2011-2021 Jeep Grand Cherokee 3.6L V6

Buy Now! This video shows you how to install a fuel pump on your 2011-2021 Jeep Grand Cherokee 3.6L V6. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need. Estimated installation time for a professional technician is approximately: 2 hours 48 minutes This repair was done on a 2012 Jeep Grand Cherokee Laredo 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2011 Jeep Grand Cherokee 2012 Jeep Grand Cherokee 2013 Jeep Grand Cherokee 2014 Jeep Grand Cherokee 2015 Jeep Grand Cherokee 2016 Jeep Grand Cherokee 2017 Jeep Grand Cherokee 2018 Jeep Grand Cherokee 2019 Jeep Grand Cherokee 2020 Jeep Grand Cherokee 2021 Jeep Grand Cherokee Tools you will need: • E12 Inverted Torx Socket • Brake Parts Cleaner • Liquid Thread Locker • Marker / Writing Utensil • Rust Penetrant • Safety Glasses • 8mm Allen Wrench • Brass Punch • Bucket • Hammer Check out our playlist: ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any...